To protect the environment from pollution, be sure to dispose of the used filters at special collection points.

Tools youll need: Replacement: engine oil and filter Peugeot 206 CC 2D.

AUTODOC recommends: Replace the oil filter every time when changing motor oil.

Step 2 Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.

Step 4 Lift the car using a jack or place it over an inspection pit.

Step 5 Put a waste oil container with at least 5 l capacity under the drainage hole.

Tip from AUTODOC: Caution The oil may be hot.Wait until the oil has completely drained from the drainage hole.Move up the container.

The oil starts to drain out of the drainage hole immediately after you have removed the oil filter.

Step 8 Unscrew the filter housing cap together with the old filter element.Use a drive socket 27.

Step 12 Remove the oil filter cover O-ring.Use a flat screwdriver.

Step 13 Clean the oil filter seat.Use all-purpose cleaning spray.

Step 14 Install a new O-ring to its mounting seat on the filter cover.

Step 15 Lubricate the rubber seal of the new filter with a little amount of fresh oil.

Step 17 Screw the cap.Use a drive socket 27.Use a torque wrench.Tighten it to 25 Nm torque.

Use a drive socket 24.Use a torque wrench.Tighten it to 30 Nm torque.

Step 21 Remove the oil filler cap.Insert the funnel.

Step 22 Pour oil into the engine through the filler.Required amount of oil: 4.25 l.

Replacement: engine oil and filter Peugeot 206 CC 2D.

AUTODOC experts recommend: Use the oil recommended by the manufacturer.

Step 23 Check the oil level using the dipstick.Top up oil if necessary.

Please note The oil level should be between the Min and Max marks.

Step 27 Check the oil level 5 minutes after the stop of the engine operation using a dipstick and add oil if necessary.

Please note The oil level should be between the Min and Max marks.Make sure that the oil filler cap is properly tightened.Check the threaded plug of the drainage hole and the oil filter seal for tightness.

Tip: Note that oil pressure warning light, which indicates insufficient pressure in the lubrication system, may be on for a longer time than usual.

After a few seconds, the oil will fill all the channels, and the light will go out.

Peugeot 206 Engine Bay Guide